Planet MH-3400 User Manual Download Page 62

Page: 62 / 156

Gigabit Multi-Homing VPN Security Router User’s Manual

Summary

There are Network Connection Type, Interface, Link Status (Up/Down), Port Activity (Port Enabled), Priority

Setting (High or Normal), Speed Status (10Mbps, 100Mbps or 1000Mbps), Duplex Status (half duplex or full

duplex), Auto Neg. (Enabled/Disabled), and VLAN.

Statistics

The packet data of this specific port will be displayed. Data include receive/ transmit packet count, receive/

transmit packet Byte count and error packet count. Users may press the refresh button to update all real-time

messages.

26B

7.3 IP/ DHCP

With an embedded DHCP server, it supports automatic IP assignation for LAN computers. (This function is

similar to the DHCP service in NT servers.) It benefits users by freeing them from the inconvenience of

recording and configuring IP addresses for each PC respectively. When a computer is turned on, it will

acquire an IP address from the device automatically. This function is to make management easier.

- 56 -

Summary of Contents for MH-3400





























































































































































Search results

Summary of Contents for MH-3400

Reviews:

Related manuals for MH-3400

Brands by name

Popular brands

Planet MH-3400, User Manual

Search results

Summary of Contents for MH-3400

Reviews:

Related manuals for MH-3400

Brands by name

Popular brands