Gigabit Multi-Homing VPN Security Router User’s Manual
Threshold- Start Load Balance
After administrator chooses which WAN ports are required for 3G service backup, the administrators can set
up bandwidth setting in the threshold- Start Load Balance columns.
In addition to backup WAN port failures, administrators can decide when the traffic is over the bandwidth
setting, 3G dongle can be connected for load balance.
"
Note
Administrators must click NSD- Start Failover checkbox before configuring the Threshold- Start
Load Balance settings.
1. Configure Threshold- Start Load Balance:
Take the above GUI screenshot for example, when the router detects that WAN1 traffic is over 10000Kbits, 3G
services will be connected for load balance.
2. Return to power Saving mode:
During 3G dongle is connected for load balance, the router will keep detecting WAN1 traffic usage. If the
WAN1 traffic is lower than 90000Kbits (10% of 10000Kbits), the router will return the 3G dongle back to power
saving mode.
Scheduling Mode
In Schedule mode, administor can set up time table for USB 3G/4G device connection.
- 149 -
