Planet MH-3400 User Manual Download Page 127

Page: 127 / 156

Gigabit Multi-Homing VPN Security Router User’s Manual

10B

Chapter 12: System Tool

System Tool

This chapter introduces the management tool for controlling the device and testing network connection.

For security consideration, we strongly suggest to change the password. Password and Time setting is in

Chapter 5.2.

43B

12.1 Diagnostic

The device provides a simple online network diagnostic tool to help users troubleshoot network-related

problems. This tool includes

DNS Name Lookup

(Domain Name Inquiry Test) and

Ping

(Packet

Delivery/Reception Test).

DNS Name lookup

On this test screen, please enter the host name of the network users want to test. For example, users may

enter www.yahoo.com.tw and press "Go" to start the test. The result will be displayed on this page.

Ping

This item informs users of the status quo of the outbound session and allows the user to know the existence

of computers online.

On this test screen, please enter the host IP that users want to test such as 168.95.1.1 Press "Go" to

start the test. The result will be displayed on this screen.

- 121 -

Summary of Contents for MH-3400





























































































































































Search results

Summary of Contents for MH-3400

Reviews:

Related manuals for MH-3400

Brands by name

Popular brands

Planet MH-3400, User Manual

Search results

Summary of Contents for MH-3400

Reviews:

Related manuals for MH-3400

Brands by name

Popular brands