Planet MH-3400 User Manual Download Page 128

Page: 128 / 156

Gigabit Multi-Homing VPN Security Router User’s Manual

44B

12.2 Firmware Upgrade

Users may directly upgrade the device firmware on the Firmware Upgrade page. Please confirm all

information about the software version in advance. Select and browse the software file, click

"Firmware

Upgrade Right Now"

to complete the upgrade of the designated file.

Attention

Please read the warning before firmware upgrade. Users must not exit this screen during

upgrade. Otherwise, the upgrade may fail.

45B

12.3 Configuration Backup

Import Configuration File

This feature allows users to integrate all backup content of parameter settings into the device. Before upgrade,

confirm all information about the software version. Select and browse the backup parameter file: "config.exp."

Select the file and click "

Import

" to

import

the file.

Export Configuration File

This feature allows users to backup all parameter settings. Click "Export" and select the location to save the

"config.exp" file.

- 122 -

Summary of Contents for MH-3400





























































































































































Search results

Summary of Contents for MH-3400

Reviews:

Related manuals for MH-3400

Brands by name

Popular brands

Planet MH-3400, User Manual

Search results

Summary of Contents for MH-3400

Reviews:

Related manuals for MH-3400

Brands by name

Popular brands