Gigabit Multi-Homing VPN Security Router User’s Manual
"
Note
In the load balance mode for Assigned Routing, the first WAN port (WAN1) will be saved for the
traffic of the IP addresses or the application service ports that are not assigned to other WANs
(WAN2, WAN3, and WAN4). Therefore, in this mode, we recommend assigning one of the
connections to the first WAN. When other WANs (WAN2, WAN3, or WAN4) are broken and
connection error remove (Remove the Connection) has been selected for the connection detection
system, traffic will be shifted to the first WAN (WAN1). In addition, if the first WAN (WAN1) is
broken, the traffic will be shifted to other WANs in turn. For example, the traffic will be shifted to
WAN2 first; if WAN2 is broken too, the traffic will be shifted to WAN3, and so on.
71B
6.2.3 Protocol Binding
The VPN router can set up to four WAN interface, the bandwidth and whether can connect to the internet will
effect the router load-balancing feature for each WAN, so the bandwidth setting and line detect is must be
correct for each WAN interface.
In “ WAN Setting, click “Edit” to enter the WAN interface configure window. In “ Bandwidth Management “ can
adjust the bandwidth for each WAN interface.
WAN Setting
Bandwidth Management
- 45 -
