- 26 -
4.4.3.3 Set IP xxx,xxx,xxx,xxx,mmm,mmm,mmm,mmm, ggg,ggg,ggg,ggg
This command allows assign IP address, netmask and gateway of Web Smart Media Converter Chassis; the correct usage
is shown as below:
set ip 192.168.0.100 255.255.255.0 192.168.0.254
and press
<Enter>
Then the following message appears under console interface:
The IP sets to 192.168.0.100
The netmask sets to 255.255.255.0
The gateway sets to 192.168.0.254
Means the IP address was changed successfully, the IP subnet address setting screen in
Figure 4-16
appears.
Figure 4-16
Set IP command screen
4.4.3.4 Set pass [oldpass] [newpass]
This command allows assign password of Web Smart Media Converter Chassis, the password setting screen in
Figure
4-17
appears.
Figure 4-17
Set pass command screen
#
Notice:
1. For security reason, please change and memorize the new password after this first setup.
2. The maximum length is 8 characters.