HDMI / Video Wall over IP
IHD-200 Series
33
3.1.4. Tearing Delay
Screen tearing may occur when the video feed to the device isn't in sync with the
display's refresh or lack of sync between two equal frame rates. During video motion,
screen tearing creates a torn look as edges of objects fail to line up. To solve this
issue, the HDMI over IP Extender provides three ways by
：
1. Switching to different video resolution
2. Setting up Tearing Delay value via GUI control. The typical value is 10000~16000
μ
s. Before setting up Tearing Delay, users need to choose control target (each or
several rows) and perform Tearing Delay individually.
3. Hardware solution
：
Using multiple Tx units. The following is a 4 x 4 example of
hard solution.
Steps
：
1. Add more Tx units to the system for each row, and set up the ID number for each
Rx unit; see below
.
