HDMI / Video Wall over IP
IHD-200 Series
32
3.1.3. Advanced Setup
After the Basic Setup is done, users may enter this tab for advanced setting. Please
notice that each monitor should have its own part of screen section and do not
overlap.
Step 1
：
Choose Control Target
Show OSD
：
Check this item and all monitors will show its number on the screen
Step 2
：
Control Options
Single Host Mode
：
MUST check this item for single host application
Horizontal Scale Up & Vertical Scale Up
：
It is NOT suggested configure these two
items for it may result flickering images.
