HDMI / Video Wall over IP
IHD-200 Series
46
2. Then choose the right firmware to the right unit (click in the right Web UI).
3. Do not interrupt while updating.
4. User should update every each unit. (Ex
：
If there are 3 Rx, user should update for
3 times.)
Q6:
I want to do Rx individual configuration, but why I can’t see all the Rx in
the drop-down list?
A:
Please make sure you entered the Web UI of Tx unit.
Q7:
How can I connect two or more Tx?
A:
User can use two or more ports HDMI splitter to connect.
Q8:
About HDCP issue.
A:
The system will disable the video output signal when it detects non-HDCP compliant
display(s) on playing the HDCP video source. All the connected output displays
MUST be HDCP compliant while the video source is HDCP compliant.
Q9:
Why I use non Full HD monitor to watch Full HD video source, the display
is so blur or choppy?
A:
We suggest user do not use the lower monitor to watch the higher quality video
source, the screen resolution can only be backward compatible, not forward
compatible. So please adjust the video source resolution appropriate for the output
screen resolution.
Q10: What is the function of the screw hole above HDMI port?
A:
Please refer to the following picture.
Step 1: Unscrew the screw from the device.
