HDMI / Video Wall over IP
IHD-200 Series
13
searching video source
R11
Blue:Link OK
Red: Viedo Unlink
Flash Blue + Red: Linking and
searching video source
LED Definition
Button Definition
Button
Unit
Function
z
Press once - Link/ Unlink video
B1
IHD-200T
&
IHD-200R
z
Factory Default Setting
with steps below: Power off the unit
→
Press and hold the button
→
Power on the unit
→
Release
the button after 17 sec. (the Power / Link LED flashes green
/ red & blue)
→
Re-power the unit
z
Press for 1 sec. - Select Graphic Mode or Video Mode (also
deploy to all the IHD-200T and IHD-200R of the same
channel) (Default: Graphic Mode)
IHD-200T
z
Press for 3 sec. – Enter Anti-Dither Adjustment Mode: Level 1
/
Level 2 / Off (also deploy to all the IHD-200T and IHD-200R
of the same channel) (Default: Off)
z
Press for 1 sec. - Select Graphic Mode or Video Mode (also
deploy to all the IHD-200T and IHD-200R of the same
channel) (Default: Graphic Mode)
z
Press for 3 sec. – Enter Anti-Dither Adjustment Mode: Level 1
/
Level 2 / Off (also deploy to all the IHD-200T and IHD-200R
of the same channel) (Factory Default: Off)
B2
IHD-200R
z
EDID Copy with steps below: Power off the unit
→
Press and
hold the button
→
Power on the unit
→
Release the button
after 12 sec. (the Network Status LED flashes yellow)
LED
Unit
Status
Description
Flashing
Connected to network
Network Status
Tx/Rx
Off
Abnormal
Green
Unlink
Blue
Link OK
Tx
Flash Blue +
Green
Linking and searching source
Red
Unlink
Blue
Link OK
Link /
Power
Rx
Flash Blue + Red
Linking and searching source
