User’s Manual of IGS-20040MT
It is recommended to use PLANET SFPs on the
Industrial Managed Switch
. If you insert an
SFP transceiver that is not supported, the
Industrial Managed Switch
might not recognize it.
Please choose the SFP transceiver which can be operated in the temperature range of -40~75
℃.
1000Base-SX/LX:
Before connecting the other switches, workstation or media converter,
1.
Make sure both sides of the SFP transceiver are with the same media type, for example: 1000Base-SX to 1000Base-SX,
1000Base-LX to 1000Base-LX.
2.
Check whether the fiber-optic cable type matches the SFP transceiver model.
To connect to 1000Base-SX SFP transceiver, use the multi-mode fiber cable -- with one side being the male duplex
LC connector type.
To connect to 1000Base-LX SFP transceiver, use the single-mode fiber cable -- with one side being the male duplex
LC connector type.
Connect the fiber cable
1.
Attach the duplex LC connector on the network cable to the SFP transceiver.
2.
Connect the other end of the cable to a device – switches with SFP installed, fiber NIC on a workstation or a media
converter.
3.
Check the LNK/ACT LED of the SFP slot on the front of the
Industrial Managed Switch
. Ensure that the SFP transceiver
is operating correctly.
100Base-FX:
Before connecting the other switches, workstation or media converter,
1.
Make sure both sides of the SFP transceiver are with the same media type or WDM pair, for example: 100Base-FX to
100Base-FX, 100Base-BX20-U to 100Base-BX20-D.
2.
Check whether the fiber-optic cable type matches the SFP transceiver model.
To connect to MFB-FX SFP transceiver, use the multi-mode fiber cable -- with one side being the male duplex LC
connector type.
To connect to MFB-F20/F40/F60/FA20/FB20 SFP transceiver, use the single-mode fiber cable -- with one side being
the male duplex LC connector type.
Connect the fiber cable
1.
Attach the duplex LC connector on the network cable to the SFP transceiver.
2.
Connect the other end of the cable to a device – switches with SFP installed, fiber NIC on a workstation or a media
converter.
3.
Check the LNK/ACT LED of the SFP slot of the switch / converter. Ensure that the SFP transceiver is operating correctly.
4.
Check the Link mode of the SFP port if the link fails. It can function with some fiber-NICs or media converters, and set the
Link mode to “
100 Force
” when needed.
37
Summary of Contents for IGS-20040MT
Page 1: ......
