User’s Manual of IGS-20040MT
■
Broadcast
: Only Broadcast MAC addresses are allowedd.
The default value is 'Any'.
Displays the OUI field of Source MAC address, i.e. first three octet (byte) of MAC
address.
SMAC
Tag Type
Indicates tag type. Possible values are:
■
Any
: Match tagged and untagged frames.
■
Untagged
: Match untagged frames.
■
Tagged
: Match tagged frames.
The default value is 'Any'
Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in the
range 1-4095 or 'Any'
VID
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
PCP
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or
'Any'.
DEI
Frame Type
Indicates the type of frame to look for incomming frames. Possible frame types
are:
■
Any
: The QCE will match all frame type.
■
Ethernet
: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
allowed.
■
LLC
: Only (LLC) frames are allowed.
■
SNAP
: Only (SNAP) frames are allowed.
■
IPv4
: The QCE will match only IPV4 frames.
■
IPv6
: The QCE will match only IPV6 frames.
Action
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
■
Class
: Classified QoS class.
■
DPL
: Classified Drop Precedence Level.
■
DSCP
: Classified DSCP value.
Modification Buttons
You can modify each QCE in the table using the following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the list of QCL.
208
Summary of Contents for IGS-20040MT
Page 1: ......