User’s Manual of IGS-20040MT
retransmission.
Tx
Timeouts
radiusAccClientExt
Timeouts
The number of accounting
timeouts to the server. After a
timeout, the client may retry to
the same server, send to a
different server, or give up. A
retry to the same server is
counted as a retransmit as
well as a timeout. A send to a
different server is counted as a
Request as well as a timeout.
This section contains information about the state of the server and the latest round-trip
time.
Name
RFC4670 Name
Description
IP Address
-
IP address and UDP port for the accounting
server in question.
State
-
Shows the state of the server. It takes one of
the following values:
Disabled
: The selected server is disabled.
Not Ready
: The server is enabled, but IP
communication is not yet up and running.
Ready
: The server is enabled, IP
communication is up and running, and the
RADIUS module is ready to accept
accounting attempts.
Dead (X seconds left)
: Accounting
attempts were made to this server, but it
did not reply within the configured timeout.
The server has temporarily been disabled,
but will get re-enabled when the dead-time
expires. The number of seconds left
before this occurs is displayed in
parentheses. This state is only reachable
when more than one server is enabled.
Other Info
Round-Trip
Time
radiusAccClientExtRo
undTripTime
The time interval (measured in
milliseconds) between the most recent
Response and the Request that matched
it from the RADIUS accounting server.
269
Summary of Contents for IGS-20040MT
Page 1: ......
