manualshive.com logo in svg

Planet IGS-20040MT, User Manual

Introducing Planet IGS-20040MT, a cutting-edge network switch designed for seamless connectivity. Get the most out of your device with the included User Manual, available for free download from our website. Easily navigate setup and troubleshooting with this comprehensive manual. Elevate your networking experience with Planet IGS-20040MT.

Share
Download
background image

User’s  Manual  of  IGS-20040MT 

 

4.4.3 Port Statistics Detail

 

This Page provides detailed traffic statistics for a specific switch port. Use the port select box to select which switch port details 

to display. The selected port belong to the currently selected stack unit, as reflected by the Page header. The displayed counters 

are the totals for receive and transmit, the size counters for receive and transmit, and the error counters for receive and transmit. 

The Port Statistics Detail screen in

 Figure 4-4-3 

appears. 

 

Figure 4-4-3:

 Detailed Port Statistics Port 1 Page Screenshot 

 

The Page includes the following fields: 

Receive Total and Transmit Total 

Object 

Description 

The number of received and transmitted (good and bad) packets 

 

Rx and Tx Packets

 

The number of received and transmitted (good and bad) bytes, including FCS, 

but excluding framing bits. 

 

Rx and Tx Octets

 

The number of received and transmitted (good and bad) unicast packets. 

 

Rx and Tx Unicast

 

The number of received and transmitted (good and bad) multicast packets. 

 

Rx and Tx Multicast

 

 

Rx and Tx Broadcast

 

The number of received and transmitted (good and bad) broadcast packets. 

 

Rx and Tx Pause 

A count of the MAC Control frames received or transmitted on this port that has 

an opcode indicating a PAUSE operation. 

 
 

100 

 

Summary of Contents for IGS-20040MT






























































































































































































































































































































































































Reviews:

No comments

Related manuals for IGS-20040MT

CSS SafetyNet Quick Install Manual preview
SafetyNet
Brand: CSS Pages: 2
Lancom 7100 VPN Manual preview
7100 VPN
Brand: Lancom Pages: 70
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Brand: Patton electronics Pages: 12
Lindsay Broadband LBON320AC Series Installation And Operation Manual preview
LBON320AC Series
Brand: Lindsay Broadband Pages: 4
Synology DiskStation Series Upgrade Installation Instructions preview
DiskStation Series
Brand: Synology Pages: 6
Alcatel OmniSwitch 6624 Network Configuration Manual preview
OmniSwitch 6624
Brand: Alcatel Pages: 546
Topcom Wireless Kit 108MBPS User Manual preview
Wireless Kit 108MBPS
Brand: Topcom Pages: 100
Planet IEEE 802.3at User Manual preview
IEEE 802.3at
Brand: Planet Pages: 2
IBM Turbo 16/4 Token-Ring PC Card 2 User Manual preview
Turbo 16/4 Token-Ring PC Card 2
Brand: IBM Pages: 123
Tripp Lite N304-10M Specification Sheet preview
N304-10M
Brand: Tripp Lite Pages: 2
Cambium Networks PMP 450i User Manual preview
PMP 450i
Brand: Cambium Networks Pages: 172
D-Link DSL-X1852E User Manual preview
DSL-X1852E
Brand: D-Link Pages: 141
D-Link DSL-G624T Quick Installation Manual preview
DSL-G624T
Brand: D-Link Pages: 72
Zte ZXHN F600 User Manual preview
ZXHN F600
Brand: Zte Pages: 12
Edimax NVR-4 User Manual preview
NVR-4
Brand: Edimax Pages: 88
Teletronics International TT5800 Quick Product Manual preview
TT5800
Brand: Teletronics International Pages: 2
Teletronics International EzBridge 5800 User Manual preview
EzBridge 5800
Brand: Teletronics International Pages: 47
Synology RX1211 User Manual preview
RX1211
Brand: Synology Pages: 20

Brands by name

Popular brands

Load more brands