User’s Manual of IGS-20040MT
Object
Description
This box is used to mark an ERPS for deletion in next Save operation.
Delete
This will create a Port 0 of the switch in the ring.
Port 0
This will create "Port 1" of the switch in the Ring. As interconnected sub-ring will
have only one ring port, "Port 1" is configured as "0" for interconnected sub-ring.
"0" in this field indicates that no "Port 1" is associated with this instance
Port 1
The Port 0 Signal Fail reporting MEP.
Port 0 SF MEP
The Port 1 Signal Fail reporting MEP. As only one SF MEP is associated with
interconnected sub-ring without virtual channel, it is configured as "0" for such
ring instances. "0" in this field indicates that no Port 1 SF MEP is associated with
this instance.
Port 1 SF MEP
The Port 0 APS PDU handling MEP.
Port 0 APS MEP
The Port 1 APS PDU handling MEP. As only one APS MEP is associated with
interconnected sub-ring without virtual channel, it is configured as "0" for such
ring instances. "0" in this field indicates that no Port 1 APS MEP is associated
with this instance.
Port 1 APS MEP
Type of Protecting ring. It can be either major ring or sub-ring.
Ring Type
Major ring group ID for the interconnected sub-ring. It is used to send topology
change updates on major ring. If ring is major, this value is same as the
protection group ID of this ring.
Major Ring ID
There is an active alarm on the ERPS.
Alarm
Buttons
: Click to add a new Protection group entry.
: Click to refresh the page immediately.
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
350
Summary of Contents for IGS-20040MT
Page 1: ......