User’s Manual of ICS-10x
-28-
Pair Connection - Local(Master)
Pair Connection - Remote(Slave)
The default mode is
“Disable”.
TCP Port Number
10x. To avoid conflicts with well known TCP ports, the
default is set to
“1024”
.
The TCP port that ICS-10x uses to listen to connections and that other device
must use to contact ICS-
Inactive Timeout
rial line before the set time expires. To disable the
inactive timeout enter
“0”.
Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the se
Example:
Use Microsoft Windows Hyper Terminal, TCP/IP Winsock mode
e services, and host
computers, using your modem, a null modem cable, a Console cable or Ethernet connection.
to an Ethernet Switch via Hyper Terminal, Winsock mode
2. Hyper Terminal set up a new connection with the TCP/IP Winsock
HyperTerminal is a program that you can use to connect to other computers, Telnet sites, onlin
The users want to use the TCP Server mode to connect
1. Setup Operation Mode and Serial Port of ICS-10x
Setup Operation Mode and Serial Port of ICS-10x
interface, set the Serial operation mode of ICS-10x to “
TCP Server
” and set the TCP Port Number to
“
23
”.
1.
From the WEB
Figure 4-14
Example: TCP erver Configuration screen
S