User’s Manual of ICS-10x
-25-
4.3 Network Configuration
This function allows setting the value for network configuration. The value is DHCP client, IP address, Subnet Mask,
Gateway, DNS and system name. Press the
“Apply”
button to set the value. The screen in Figure 4-10 appears.
Figure 4-10
Network Configuration screen
The page includes the following configurable data:
DHCP Client
Disable or enable the DHCP function.
When DHCP Client is set to “Enable”, the ICS-10x will send a DHCP request to the DHCP
server in the network. Once the DHCP Server get the request, it will assign a dynamic IP
address, subnet mask and gateway to the ICS-10x.
The factory default setting is “Disable”
IP Address
Assign the converter IP Address.
The factory default value is
192.168.0.100
Subnet Mask
Assign the converter Subnet Mask.
The factory default value is
255.255.255.0
Gateway
Assign the converter gateway.
The factory default value is
192.168.0.254
DNS
DNS is the way that Internet domain names are identified and translated into IP addresses.
A domain name is an alphanumeric name, such as planet.com, that it is usually easier to
remember. Assign the DNS server IP address.
System Name
Allow set value for system name. (The maximum length is 15 characters).
