GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
To modify the RIP (Routing information protocol) Parameters:
RIP Mode: Enable
Auto RIP Summary: Enable
Press Modify
RIP Mode
:
This parameter determines how the router handle RIP (Routing information protocol). RIP allows it
to exchange routing information with other router. If set to Disable, the gateway does not
participate in any RIP exchange with other router. If set Enable, the router broadcasts the routing
table of the router on the LAN and incoporates RIP broadcast by other routers into it’s routing table.
If set silent, the router does not broadcast the routing table, but it accepts RIP broadcast packets
that it receives.
RIP Version
:
It determines the format and broadcasting method of any RIP transmissions by the gateway.
RIP v1
: it only sends RIP v1 messages only.
RIP v2
: it sends RIP v2 messages in multicast and broadcast format.
60
Summary of Contents for G.SHDSL.bis Bridge Router GRT-504
Page 1: ...4 Wire G SHDSL bis Firewall Router GRT 504 User s Manual...
Page 12: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 1 3 Applications 11...
Page 24: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 23...
Page 25: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 24...
