GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
Type the
WAN1
Parameters;
VPI
: 0
VCI
: 32
AAL5
Encap
: LLC
Protocol
: IPoA , EoA , IPoA + NAT or EoA + NAT
Note: The Protocol used in CO and CPE have to be the same.
Click Next to setup the IP parameters.
For more understanding about
NAT,
review the chapter of NAT/DMZ .
IP Address
: 192.168.20.1
Subnet Mask
: 255.255.255.0
Gateway
: 192.169.30.2
Click Next
The screen will prompt the parameters that we will write in NVRAM. Check the parameters before
writing in NVRAM.
Press Restart to restart the router working with new parameters or press continue to setup another
parameter.
6.6.2.2
CPE side
Click ROUTE and CPE Side then press Next.
102
Summary of Contents for G.SHDSL.bis Bridge Router GRT-504
Page 1: ...4 Wire G SHDSL bis Firewall Router GRT 504 User s Manual...
Page 12: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 1 3 Applications 11...
Page 24: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 23...
Page 25: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 24...
