Planet G.SHDSL.bis Bridge Router GRT-504, User Manual

Page: 126 / 152

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
7.9 Administration
You can modify the user profile, security, SNMP (Sample Network Management Protocol),
supervisor information and SNTP (Simple Network Time Protocol) in
admin .
The route is enable
Î
admin .
For configuration the parameters, move the cursor “
>> “ to admin and press enter.
>> user Manage user profile
security Setup system security
snmp Configure SNMP parameter
passwd Change supervisor password
id Change supervisor ID
sntp Configure time synchronization
7.9.1 User Profile
You can use
user command to clear, modify and list the user profile. You can setup at most five
users to access the router via console port or telnet in user profile table however users who have
the supervisor password can change the configuration of the router. Move the cursor “
>> “ to user
and press enter key.
>> clear Clear user profile
modify Modify the user profile
list List the user profile
You can delete the user by number using
clear command. If you do not make sure the number of
user, you can use list command to check it. Modify command is to modify an old user information
or add a new user to user profile.
To modify or add a new user, move the cursor to
modify and press enter.
----------------------------------------------------------------------
Command: admin user modify <1~5> <more...>
Message: Please input the following information.
Legal access user profile number <1~5> :
2
----------------------------------------------------------------------
The screen will prompt as follow.
>> Attrib UI mode
Profile User name and password
There are two UI mode,
command and menu mode, to setup the router. We will not discuss
command mode in this manual.
Move the cursor to
Attrib to change the UI mode on this profile
Move the cursor to Profile and press enter, you can change the username and their password on
this profile.
125