Appendix B
Error Messages of Enabler Programs
CARDGO.EXE
Here is the list of error messages the CARDGO.EXE may display and
correction method we suggested.
[Error 1]
"
ENW-3502-FC
enabler failed in request IRQ."
The IRQ number you specified is not supported by the Card Services
or is in conflict with another device.
Correction :
Change the IRQ number to a valid setting, as listed
above.
[Error 2]
"
ENW-3502-FC
enabler failed in request I/O port."
The IO port you specified is not supported by the Card Services or is
in conflict with another device.
Correction :
Change the IO port to a valid setting, as listed above.
[Error 4]
"General error."
Register service failed with Card Services program.
Correction :
Reboot the system and try again.
[Error 5]
"Your Card Service is not compliant with Version 5.00 or
higher!"
Correction :
Re-install a new version of Card Service.
[Error 6]
"
ENW-3502-FC
is not active ! Enable again."
Maybe the Ethernet controller malfunctioned.
Correction:
Enable again. If it still can not work, contact your
dealer.
[Error 7]
"Your Card Services is outdated."
"Please install new version of Card Service."
Correction :
Re-install a new version of the Socket and Card
Services program.
[Error 8]
"Parameter too long."
Too many parameters issued with CARDGO.
Correction :
Refer to the default syntax listed above and correct it.
