PLANETlENW-350-FC
36
Appendix A
Troubleshooting for Windows
Environments
These guidelines give you tips to deal with some problems on using
ENW-3502-FC
. If the problems remain unsolved, contact your dealer for
assistance.
A.1 Windows 95 OSR2
1.
Ejecting the card from the CardBus socket hangs or reboots the
computer.
Solution:
To prevent this phenomenon from occurring, stop the card
by using the PC Card tool in the Control Panel or the PC Card icon
on the taskbar before you remove the card.
2.
The card can not be detected when reinserted
It is caused by certain unstable CardBus status lines for a time when
the card is removed and reinserted. The Windows 95 drivers may
read an incorrect status during this period of signal instability, and
fail to detect the correct status of the card.
Solution:
The card can be detected by clicking “Refresh” in Device
Manager.
3.
Windows 95 stopped responding with the card installed.
On certain laptop computers with CardBus support, the computer
may hang when you attempt to start Windows 95 OSR2. This may
occur if you insert the card and a non-CardBus card into the slots
before you start OSR2.
Solution:
To work around this problem, insert the non-CardBus
card into the slot after you have started OSR2.
4.
The card in the docking station cannot be recognized or
configured, or cannot function.
This problem occurs in some docking stations and prevents IRQ
available to the PCI bus from being assigned to CardBus devices
