CardBus 10/100Mbps Ethernet Card
25
Chapter 6
Client Driver Installation
6.1 System Requirements
6.1.1 Hardware Requirements
Notebook equipped with Type II CardBus slot and CardBus Socket
controller.
6.1.2 Firmware Requirements
Fully compliant Rev. 2.1 or above PCI BIOS supplied with the PC.
6.1.3 Software Requirements
Due to the newness of the CardBus specification, most Card and Socket
Services software still do not currently support CardBus devices. The
Card & Socket service drivers should comply with PC Card Standard,
February 1995 or higher version.
For your reference, the following DOS versions of the Card and Socket
Services are known to support CardBus :
•
AMICard Manager Pro Ver 2.1.2
(supports CL-PD6832, TI113X)
•
Phoenix Card Manager Ver 2.0
(supports TI113X)
6.2 Driver Installation
Before your computer system can recognize your
ENW-3502-FC
, the
driver programs must first be installed to enable the card.
