PLANETlENW-350-FC
30
After the configuration process, you will be prompted to select the type
of network that you are installing the drivers into. Select a Network
Operating System from the list by moving the cursor to your selection
and pressing <Enter>.
Figure 6-3.5 Network OS Selection
After selecting the Network Operating System, the INSTALL program
will copy and/or modify some files on your boot drive. Your
CONFIG.SYS file will also be modified to include the Client Driver. You
should see the following message if installation has been successful.
Figure 6-3.6 Successful Installation Screen
PLANET ENW-3502-FC 10/100 Ethernet Card Installation Program
INSTALLATION SUCCESSFUL !
INSTALL has created/modified your AUTOEXEC.BAT and CONFIG.SYS file
to enable the CardBus 10/100Mbps Ethernet Card. The original file has been
renamed to AUTOEXEC.PCM and CONFIG.PCM. If you have any problems
with the new CONFIG.SYS file when you reboot your computer, you should
restore the original files.
Please remove the Driver Installation Disk and reboot your computer.
Press any key to return to DOS
PLANET ENW-3502-FC 10/100 Ethernet Card Installation Program
SELECT DRIVERS YOU WANT TO INSTALL
Please select the network drivers that you want to install. Use the arrow
key to highlight the desired item. When a item is highlighted press
<Enter> to select it. If the network drivers that you want to install to is not
in the following list, please press <Esc> to continue.
Netware ODI Driver
Windows for Workgroups
LAN Manager
Artisoft LANtastic
<Enter> to continue <Esc>to continue <F3> to return to DOS
