Chapter 5
Driver Installation for Windows NT 4.0
The installation procedure assumes the network component has been
installed on your computer. To check whether the network component
has been installed, double click the
Network
icon in
Control Panel
. If it
has not, refer to the Windows NT 4.0 installation guide to install the
component.
While installing the network component, Windows NT 4.0 will ask you to
install the driver of network adapter. The driver installation procedure is
similar to the following one.
Follow the steps below to install the driver.
1. Insert the
ENW-3502-FC
into an open CardBus slot on your
notebook. Login to NT 4.0 as the
administrator
.
2. If you have installed SystemSoft CardWizard For Windows NT
TM
,
this utility will recognize
ENW-3502-FC
and request to install the
driver for it. In this situation, you click the
Correct
button, the
Figure 5.1 displayed.
Figure 5.1 SystemSoft Wizard
3. Doublic click
Network
icon in
Control Panel
, and select
Adapters
tab, the Figure 5.2 displayed.
