Content Security Gateway User’s Manual
How to use Address Table
With easily recognized names of IP addresses and names of address groups shown in the address table, the
Administrator can use these names as the source address or destination address of control policies. The
address table should be built before creating control policies, so that the Administrator can pick the names of
correct IP addresses from the address table when setting up control policies.
4.3.1.1 LAN
Entering the LAN window
Step 1.
Click LAN under the
Address
menu to enter the LAN window. The current setting information
such as the name of the LAN network, IP and Netmask addresses will show on the screen.
ÍÍ
Definition
Name
: Name of LAN network address.
IP / Netmask
: IP address and subnet mask of LAN network
MAC Address
: MAC address corresponded with LAN IP address.
Configure
: You can configure the settings in LAN network. Click
Modify
to change the parameters in LAN
network. Click
Remove
to delete the settings.
In the
LAN
window, if one of the members has been added to
Policy
or
LAN Group
, the
Configure
column
will show the message –
In Use
.
In this case, you are not allowed to modify or remove the setting.
Adding a new LAN Address
Step 1.
In the LAN window
,
click the
New Entry
button.
Step 2.
In
the
Add New Address
window, enter the settings of a new LAN network address.
Step 3.
Click
OK
to add the specified LAN network or click
Cancel
to cancel the changes.
- 44 -
