Content Security Gateway User’s Manual
Disable PPTP:
Check to disable PPTP Server.
Enable PPTP:
Check to enable PPTP Server.
Encryption:
the default is set to disabled.
Client IP Range:
Enter the IP range allocated for PPTP Clients when they connect to
the PPTP server.
Allow remote client to connect to Internet:
Check to allow remote PPTP client accessing
Internet via PPTP tunnel.
Auto-Disconnect if idle
□
minutes:
Configure this device to disconnect to the PPTP
Server when there is no activity for a predetermined period of time. To keep the line always
connected, set the number to 0.
Echo-Request:
Configure the timing to detect the VPN status. If failed, CS-500 will
disconnect the VPN tunnel.
Step 4.
Click
OK
to save modifications or click
Cancel
to cancel modifications
Adding PPTP Server
Step 1.
Select
VPN
→
PPTP Server
. Click
New Entry.
Step 2.
Enter appropriate settings in the following window.
User name: Specify the PPTP client. This should be unique.
Password: Specify the PPTP client password.
Client IP assigned by:
1. IP Range: check to enable auto-allocating IP for PPTP client to connect.
2. Fixed IP: check and enter a fixed IP for PPTP client to connect.
- 98 -
