Planet Content Security Gateway CS-500 User Manual Download Page 21

Page: 21 / 215

Content Security Gateway User’s Manual

4.1.3 Software Update

Under

Software Update

, the admin may update the device’s software with a newer software. You may

acquire the current version number of software in

Version Number

Administrators may visit distributor’s web

site to download the latest version and save it in server’s hard disk.

Step 1.

Click

Browse

to select the latest version of Software.

Step 2.

Click

to update software.

ÍÍ

NOTE:

It takes three minutes to update the software. The system will restart automatically after updating the

software.

4.1.4 Setting

The

Administrator may use this function to backup Content Security Gateway configurations and export (save)

them to an

“Administrator”

computer or anywhere on the network; or restore a configuration file to the

device; or restore the Content Security Gateway back to default factory settings.

Entering the Settings window

Click

Setting

in the

Configure

menu to enter the

Settings

window. The

Setting

will be shown on the screen.

- 16 -

Summary of Contents for Content Security Gateway CS-500
























































































































































































































Search results

Summary of Contents for Content Security Gateway CS-500

Reviews:

Brands by name

Popular brands

Planet Content Security Gateway CS-500, User Manual

Search results

Summary of Contents for Content Security Gateway CS-500

Reviews:

Brands by name

Popular brands