802.11n
Wireless
ADSL
2/2+
Router
ADN
‐
4102
54
Entries in this table allow you to configure one IP pool for specified source IP address from LAN, so one
packet whose source IP is in range of the specified address will select one IP address from the pool for
NAT.
The following table describes the parameters:
Fields
Description
Type
There are four types: one-to-one, Many-to-One, Many-to-Many, Many-to-one.
Local Start & End IP
Enter the local IP Address you plan to map to. Local Start IP is the starting local
IP address and Local End IP is the ending local IP address. If the rule is for all
local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255
Global Start & End IP
Enter the Globe IP Address you want to do NAT. Global Start IP is the starting
global IP address and Global End IP is the ending global IP address. If you
have a dynamic IP, enter 0.0.0.0 as the global Start IP.
NAT IP Mapping Table
This displays the information about the Mapping addresses.
