802.11n
Wireless
ADSL
2/2+
Router
ADN
‐
4102
9
Port and Button Definition
Connector
Description
POWER Button
The power button is for turning on or off the router.
WPS
Pressing for 5 seconds and then releasing it can enable the WPS function of the
wireless clients. The ADN-4102 and clients will automatically configure the security
key and connect directly.
RST
The reset button can restore the default settings of device. To restore factory
defaults, keep the device powered on and push a paper clip into the hole. Press
down the button for over 5 seconds and then release.
PWR
Power connector with 12V DC, 0.5A
LAN 1-4
Router is successfully connected to a device through the corresponding port (1, 2, 3,
or 4). If the LED is flashing, the ADN-4102 is actively sending or receiving data over
that port.
ADSL
The RJ11 connector allows data communication between the modem and the ADSL
network through a twisted-pair phone wire.
1.1 System Requirements
Make sure first that you have prepared these following items to guarantee the router can work normally.
Services
subscriptions.
An 10/100Mbps Ethernet card installed on your PC.
Hub or Switch. (Attached to several PCs through one of Ethernet interfaces on the device).
Operating system: Windows 7, Windows 2000, or Windows XP.
Internet Explorer V8.0 or higher, or firefox v23 or higher.
