802.11n
Wireless
ADSL
2/2+
Router
ADN
‐
4102
31
also act as a surrogate DHCP server (DHCP Relay) where it relays IP address assignment from an actual
real DHCP server to clients. You can enable or disable DHCP server.
Click
DHCP
in the left pane and the page shown in the following figure appears.
The following table describes the parameters:
Field
Description
DHCP Mode
You can choose None, DHCP Relay and DHCP Server. If set to DHCP
Server, the router can assign IP addresses, IP default gateway and DNS
Servers to the host in Windows95, Windows NT and other operating
systems that support the DHCP client.
Interface
By default, all ports are selected; click it to unselect and those ports cannot
function with the IP address.
IP Pool Range
Specify the lowest and highest addresses in the pool. It specifies the first IP
address in the IP address pool. The router assigns IP address based on the
IP pool range to the host.
Show Client
Click it and the Active DHCP Client Table appears. It shows IP addresses
assigned to clients.
