802.11n
Wireless
ADSL
2/2+
Router
ADN
‐
4102
37
3.5 WLAN
This page contains all the wireless basic settings. Most users will be able to configure the wireless portion
and get it working properly using the setting on this screen.
The following table describes the parameters:
Fields
Description
Disable Wireless
LAN Interface
Enable/Disable the wireless function for ADSL modem.
Band
Select the appropriate band from the list provided to correspond with your network
setting.
Mode
Select AP Mode.
SSID
The Service Set Identifier (SSID) or network name. It is case sensitive and must not
exceed 32 characters, which may be any keyboard character. The mobile wireless
stations will select the same SSID to be able to communicate with your ADSL modem
(or AP).
Channel Width
Select channel width to 20MHz, 40MHz or 20/40MHz.
Control Sideband
Select upper or lower sideband.
Channel Number
Select the appropriate channel from the list provided to correspond with your network
settings. You will assign a different channel for each AP to avoid signal interference.
Radio Power
(Percent)
100%, 80%, 50%, 25%, 10%.
Associated
Click it to see the clients currently associated with the ADSL modem.
