manualshive.com logo in svg

Planet Networking & Communication SGSD-1022, User Manual, Page: 95 / 688

Share
Download
Planet Networking & Communication SGSD-1022 User Manual Download Page 95

User’s Manual of SGSD-1022 / SGSD-1022P 

SGSW-2840 / SGSW-2840P 

 

 

95

4.2.12.8 LLDP Device Statistics Details 

Use the LLDP Device Statistics Details screen to display detailed statistics for LLDP-capable devices attached to specific 

interfaces on the Managed Switch.   

 

 

Figure 4-2-35

 LLDP Device Statistics Details page screenshot 

 

The page includes the following fields: 

Object 

Description 

•

 

Frames Discarded 

Number of frames discarded because they did not conform to the general 

validation rules as well as any specific usage rules defined for the particular TLV.

•

 

Frames Invalid 

A count of all LLDPDUs received with one or more detectable errors. 

•

 

Frames Received 

Number of LLDP PDUs received. 

•

 

Frames Sent 

Number of LLDP PDUs transmitted. 

•

 

TLVs Unrecognized 

A count of all TLVs not recognized by the receiving LLDP local agent. 

•

 

TLVs Discarded 

A count of all LLDPDUs received and then discarded due to insufficient memory 

space, missing or out-of-sequence attributes, or any other reason. 

•

 

Neighbor Ageouts 

A count of the times that a neighbor’s information has been deleted from the 

LLDP remote systems MIB because the remote TTL timer has expired. 

 

 

 

Summary of Contents for SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments