manualshive.com logo in svg

Planet Networking & Communication SGSD-1022, User Manual, Page: 267 / 688

Share
Download
Planet Networking & Communication SGSD-1022 User Manual Download Page 267

User’s Manual of SGSD-1022 / SGSD-1022P 

SGSW-2840 / SGSW-2840P 

 

 

267

 

Figure 4-11-11

 AAA \ AAA RADIUS Group Settings screenshot 

 

Click Security, AAA, Accounting, Exec Settings. Enter a defined method name for console and Telnet connections, and click 

Apply. 

 

The page includes the following fields: 

 

Object 

Description 

Method Name 

Specifies a user defined method name to apply to console and Telnet 

connections. 

 

 

 

4.11.5.8 AAA Accounting Summary 

This feature displays all accounting configured accounting methods, the methods applied to specified interfaces, and basic 

accounting information recorded for user sessions. 

Summary of Contents for SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments