manualshive.com logo in svg

Planet Networking & Communication SGSD-1022, User Manual, Page: 265 / 688

Share
Download
Planet Networking & Communication SGSD-1022 User Manual Download Page 265

User’s Manual of SGSD-1022 / SGSD-1022P 

SGSW-2840 / SGSW-2840P 

 

 

265

 

Figure 4-11-9

 AAA \ AAA RADIUS Group Settings screenshot 

 

 

Click Security, AAA, Accounting, 802.1X Port Settings. Enter the required accounting method and click Apply. 

 

The page includes the following fields: 

 

Object 

Description 

Port/Trunk 

Specifies a port or trunk number. 

Method Name 

Specifies a user defined method name to apply to the interface.   

This method must be defined in the 

AAA Accounting Settings

 menu. 

(Range: 1-255 characters) 

 

 

 

4.11.5.6 AAA Accounting Exec Command Privileges 

This feature specifies a method name to apply to commands entered at specific CLI privilege levels.   

 

Summary of Contents for SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments