Planet Networking & Communication SGSD-1022 User Manual Download Page 270

Page: 270 / 688

User’s Manual of SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

270

The group name “” specifies all configured hosts (see

“

Configuring Local/Remote Logon Authenticatio

n”). Any other group name

refers to a server group configured on the Group Settings page.

Authorization is only supported for servers.

4.11.5.11 AAA Authorization EXEC Settings

This feature specifies an authorization method name to apply to console and Telnet connections.

Figure 4-11-13

Settings screenshot

Click Security, AAA, Authorization, Exec Settings.

Enter a defined method name for console and Telnet connections, and click Apply.

The page includes the following fields:

Object

Description

Method Name

Specifies a user-defined method name to apply to

console

and

Telnet

connections.

4.11.5.12 AAA Authorization Summary

The Authorization Summary displays the configured authorization methods and the interfaces to which they are applied.

Figure 4-11-14

Settings screenshot

Summary of Contents for SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SGSD-1022

Reviews:

Planet Networking & Communication SGSD-1022, User Manual, Page: 270 / 688

Search results

Summary of Contents for SGSD-1022

Reviews: