manualshive.com logo in svg

Planet Networking & Communication SGSD-1022, User Manual, Page: 307 / 688

Share
Download
Planet Networking & Communication SGSD-1022 User Manual Download Page 307

User’s Manual of SGSD-1022 / SGSD-1022P 

SGSW-2840 / SGSW-2840P 

 

 

307

 

Figure 4-11-33

 Settings screenshot 

Select Security, ACL, Configuration. Enter an ACL name in the Name field, select the list type (IP Standard, IP Extended, or 

MAC), and click Add to open the configuration page for the new list. 

 

 

The page includes the following fields: 

 

Object 

Description 

Name 

Name of the ACL.   

(Maximum length: 15 characters) 

There are three filtering modes:   

--Standard 

IP ACL mode that filters packets based on the source IP 

address. 

–- Extended 

IP ACL mode that filters packets based on source or destination 

IP address, as well as protocol type and protocol port number. If 

the “TCP” protocol is specified, then you can also filter packets 

based on the TCP control code. 

Type 

–- MAC 

MAC ACL mode that filters packets based on the source or 

destination MAC address and the Ethernet frame type (RFC 

1060). 

 

 

Summary of Contents for SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments