Planet Networking & Communication IGSW-24040T User Manual Download Page 96

Page: 96 / 521

User’s Manual of IGSW-24040T

Transmit Error Counters

Object

Description



Tx Drops

The number of frames dropped due to output buffer congestion.



Tx Late/Exc. Coll.

The number of frames dropped due to excessive or late collisions.

Buttons

: Click to refresh the page immediately.

: Clears the counters for all ports.

Auto-refresh

: Check this box to enable an automatic refresh of the page at regular intervals.

4.4.4 SFP Module Information

You can check the physical or operational status of an SFP module via the SFP Module Information page. This page shows the

operational status, such as the transceiver type, speed, and wavelength and supports distance of SFP module on a specific

interface. You can also use the hyperlink of port no. to check the statistics on a speficic interface. The SFP Module Information

screen in

Figure 4-4-4

appears.

Figure 4-4-4

SFP Module Information for Switch Page Screenshot

The page includes the following fields:

Object

Description



Type

Display the type of current SFP module, the possible types are:



1000Base-SX



1000Base-LX



100Base-FX

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Search results

Summary of Contents for IGSW-24040T

Reviews:

Planet Networking & Communication IGSW-24040T, User Manual, Page: 96 / 521

Search results

Summary of Contents for IGSW-24040T

Reviews: