manualshive.com logo in svg

Planet Networking & Communication IGSW-24040T, User Manual, Page: 288 / 521

Share
Download
Planet Networking & Communication IGSW-24040T User Manual Download Page 288

User’s Manual of IGSW-24040T 

 

 

Policy 

Policy 

Unknown

: The network policy for the specified application type is currently 

unknown. 

Defined

: The network policy is defined. 

 

TAG 

TAG is indicating whether the specified application type is using a tagged or an 

untagged VLAN. Can be Tagged ot Untagged 

Untagged

: The device is using an untagged frame format and as such does not 

include a tag header as defined by IEEE 802.1Q-2003. 

Tagged

: The device is using the IEEE 802.1Q tagged frame format 

 

VLAN ID 

VLAN ID is the VLAN identifier (VID) for the port as defined in IEEE 

802.1Q-2003. A value of 1 through 4094 is used to define a valid VLAN ID. A 

value of 0 (Priority Tagged) is used if the device is using priority tagged frames as 

defined by IEEE 802.1Q-2003, meaning that only the IEEE 802.1D priority level 

is significant and the default PVID of the ingress port is used instead. 

 

Priority 

Priority is the Layer 2 priority to be used for the specified application type.One of 

eight priority levels (0 through 7) 

 

DSCP 

DSCP is the DSCP value to be used to provide Diffserv node behavior for the 

specified application type as defined in IETF RFC 2474. Contain one of 64 code 

point values (0 through 63). 

 

Buttons 

: Click to refresh the page immediately. 

Auto-refresh 

: 

Check this box to enable an automatic refresh of the page at regular intervals. 

 

 

4.14.5 Neighbor   

This page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on which an 

LLDP neighbor is detected. The LLDP Neighbor Information screen in 

Figure 4-14-4

 appears. The columns hold the following 

information:   

 

Figure 4-14-4

 LLDP Neighbor Information Page Screenshot 

 

The page includes the following fields: 

 

288 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments