Planet Networking & Communication IGSW-24040T User Manual Download Page 66

Page: 66 / 521

User’s Manual of IGSW-24040T

: Updates the system log entries, starting from the last entry currently displayed.

: Updates the system log entries, ending at the last available entry ID.

4.2.12 Detailed Log

The switch system detailed log information is provided here. The Detailed Log screen in

Figure 4-2-15

appears.

Figure 4-2-15

Detailed Log Page Screenshot

The page includes the following fields:

Object

Description



The ID (>= 1) of the system log entry.



Message

The message of system logging entry.

Buttons

: Click to refresh the page; any changes made locally will be undone.

: Updates the system log entries, starting from the first available entry ID.

: Updates the system log entries, ending at the last entry currently displayed.

: Updates the system log entries, starting from the last entry currently displayed.

: Updates the system log entries, ending at the last available entry ID.

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Search results

Summary of Contents for IGSW-24040T

Reviews:

Planet Networking & Communication IGSW-24040T, User Manual, Page: 66 / 521

Search results

Summary of Contents for IGSW-24040T

Reviews: