manualshive.com logo in svg

Planet Networking & Communication IGSW-24040T, User Manual, Page: 125 / 521

Share
Download
Planet Networking & Communication IGSW-24040T User Manual Download Page 125

User’s Manual of IGSW-24040T 

 

 

The port settings relate to the currently selected unit, as reflected by the page header. The Port Isolation Configuration screen in 

Figure 4-6-6

 appears. 

 

Figure 4-6-6

 Port Isolation Configuration Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

 

Port 

The switch interface. 

 

PVLAN Port Type 

Displays private VLAN port types.   

- 

Isolated

: A single stand-alone VLAN that contains one promiscuous port and 

one or more isolated (or host) ports. This VLAN conveys traffic between the 

isolated ports and a lone promiscuous port.

 

- 

Promiscuous

: A promiscuous port can communicate with all the interfaces 

within a private VLAN. This is the default setting. 

 

 

125 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments