manualshive.com logo in svg

Planet Networking & Communication IGSW-24040T, User Manual, Page: 199 / 521

Share
Download
Planet Networking & Communication IGSW-24040T User Manual Download Page 199

User’s Manual of IGSW-24040T 

 

UDP

: Select UDP to filter IPv4 UDP protocol frames. Extra fields for defining 

UDP parameters will appear. These fields are explained later in this help file.   

TCP

: Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining TCP 

parameters will appear. These fields are explained later in this help file. 

 

IP Protocol Value 

When "Specific" is selected for the IP protocol value, you can enter a specific 

value. The allowed range is 

0

 to 

255

. A frame that hits this ACE matches this IP 

protocol value. 

 

IP TTL 

Specify the Time-to-Live settings for this ACE.   

zero

: IPv4 frames with a Time-to-Live field greater than zero must not be able to 

match this entry. 

non-zero

: IPv4 frames with a Time-to-Live field greater than zero must be able to 

match this entry.   

Any

: Any value is allowed ("don't-care"). 

 

IP Fragment 

Specify the fragment offset settings for this ACE. This involves the settings for the 

More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an 

IPv4 frame.   

No

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater 

than zero must not be able to match this entry.   

Yes

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater 

than zero must be able to match this entry.   

Any

: Any value is allowed ("don't-care"). 

 

IP Option 

Specify the options flag setting for this ACE. 

No

: IPv4 frames where the options flag is set must not be able to match this 

entry.  

Yes

: IPv4 frames where the options flag is set must be able to match this entry. 

Any

: Any value is allowed ("don't-care"). 

 

SIP Filter 

Specify the source IP filter for this ACE.   

Any

: No source IP filter is specified. (Source IP filter is "don't-care".)   

Host

: Source IP filter is set to Host. Specify the source IP address in the SIP 

Address field that appears.   

Network

: Source IP filter is set to Network. Specify the source IP address and 

source IP mask in the SIP Address and SIP Mask fields that appear. 

 

SIP Address 

When "Host" or "Network" is selected for the source IP filter, you can enter a 

specific SIP address in dotted decimal notation. 

 

SIP Mask 

When "Network" is selected for the source IP filter, you can enter a specific SIP 

mask in dotted decimal notation. 

 

DIP Filter 

Specify the destination IP filter for this ACE.   

Any

: No destination IP filter is specified. (Destination IP filter is "don't-care".)   

Host

: Destination IP filter is set to Host. Specify the destination IP address in the 

 

199 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments