2.1 OPERATOR QUALIFICATION
The following qualification requirements are based on the definitions given under the ‘Glossary of
Terms ‘ section on page 3. The qualification requirements for various tasks relating to the Product are
as follows :
Installation:
SERVICE PERSONNEL
Use:
OPERATOR
Cleaning:
OPERATOR
Routine maintenance: SERVICE PERSONNEL
Special maintenance: SERVICE PERSONNEL
Disposal:
RESPONSIBLE ORGANISATION and SERVICE PERSONNEL
2.2 ENVIRONMENTAL CONSIDERATIONS
2.2.1 PACKAGING
Cardboard boxes containing Product. Dispose of these in compliance with national directives appli-
cable for waste disposal.
2.2.2 TRANSPORT
Product transport is done by land, sea or air according to the following characteristics:
Temperature (°C): -15 / +60
Humidity: 10 / 75 %
Atmospheric pressure (hPa): 500 / 1060
2.2.3 STORAGE
The packaged Product must be stored (warehoused) in dry premises having the following character-
istics:
Temperature (°C): -15 / +60
Humidity: 10 / 75 %
Atmospheric pressure (hPa): 500 / 1060
2.2.4 PLACE OF INSTALLATION
The premises where the product is started up must have the following characteristics:
Temperature (°C): +10 / +40
Humidity: 30 / 75 %
Atmospheric pressure (hPa): 700 / 1060
2.2.5 RECYCLING
Design of the Product takes into account the materials used in the manufacture of components.
This is to ensure when it reaches its end of life, the disposal method with the lowest or least negative
impact, on human health and the environment is selected.
Unlike the sources of traditional light, LED’s do not contain mercury, toxic gases, filaments or fragile
parts. Due to the fixture being over 95% recyclable and there being no Bulbs/Globe changing during
the ULED life of 50,000+ hours, your environmental footprint will be significantly reduced.
When your Product reaches the end of its life, contact Planet lighting or our local agents to learn
about recycling options. The Phantom light must be disposed of properly according to local laws
and, regulations.
2.3 GRAPHIC SIGNS AND SYMBOLS USED IN THE INSTALLATION MAN-
UAL
The following safety measures must be put in place during Product installation, use and servicing.
To emphasize their importance, a number of safety precautions are repeated throughout the manual.
Follow the safety precautions before using or repairing the Product. Carefully abiding by the safety
precautions improves the ability to use the Product safely and correctly and helps prevent incorrect
maintenance which could be hazardous and cause damage. The safety measures are
