background image

5.0   Maintenance

5.1  Maintenance Task Schedule

!

  DANGER! Risk of electric shock. Turn off the light before commencing any maintenance. The electrical system should 

not be powered when divers are in the water.

!

  DANGER! Risk of burns and permanent injury. Do not run lights out-of-water.  Ensure the Focus light is submerged 

before operating light.

!

  DANGER! Lights may cause eye damage. Do not look into lights during operation. 

!

  DANGER! Risk of electric shock. Loose or damaged Ingress Protection Caps (IPCs) can become flooded and present an 

electrical hazard. This may lead to shock, burns or fire. Ensure IPCs are tightly fitted and replaced if damaged.

!

  WARNING! The disinfectants/cleaning agents may contain substances harmful to health: use disinfectants only 

recommended by your health authorities and follow the manufacturer’s user instruction carefully.

!

  CAUTION! Operating lights out of water will damage the light fittings.

!

  CAUTION!  Do not use abrasive products, petrol, paint thinners, alkaline detergent, acidic cleaning agents or aldehydes. 

Make sure the proportions of the detergents/cleaning agents are accurate based on manufacturers instructions.  

Regular maintenance is an important contributor to user safety, normal operation and to prolonging the life of the Product. 
Observe the above warnings and always ensure your workplace safety procedures are followed when carrying out maintenance 
tasks. The following periodic maintenance tasks are recommended.

View this manual live 

on our website.  

Sea Cage Lighting System Manual

ver.13082021-00         

Page 35 

Please note the information in this document 

is subject to change without notice. 

Summary of Contents for FOCUS














































Reviews: