AC Plug Board(s)
Two plug board choices provide AC installation options. AC Plug Board parts are supplied “ready to wire”. Selection and
installation of a connector suitable for marine use is the responsibility of the electrical installer. The Uno Panel allows choice in
supply circuit design, supporting either a single 4-outlet plug board (1x4) or two 2-outlet plug boards (2x2). See Part numbers:
UP1-PB-4 and UP1-PB-2 in the Parts Catalogue (section 8.0).
!
DANGER – Risk of Electric Shock.
Mains AC Input Installation by Authorised
Service Personnel ONLY. Ensure Mains
power is OFF and disconnected before
handling plug board(s). Ensure Ingress
Protection Caps are securely fitted.
AC Plug Board model: UP1-PB-2 (2 x 2 socket)
AC Plug Board model: UP1-PB-4 (1 x 4 socket)
Ingress Protection Caps (IPCs) must be fitted
securely on all outlets not in use.
Pictured: A plug board located within the Uno Panel provides the AC input into each Uno unit.
View this manual live
on our website.
Sea Cage Lighting System Manual
ver.13082021-00
Page 27
Please note the information in this document
is subject to change without notice.
