3.3 Focus Installation
!
DANGER! Risk of electric shock. Ensure that Mains Power AC is turned OFF and disconnected BEFORE attempting
installation of the Focus sea cage light.
!
DANGER! Risk of burns and permanent injury. Do not run lights out-of-water. Ensure the Focus light is submerged
before operation.
!
DANGER – Risk of Electric Shock.
Ensure Mains AC is OFF and disconnected BEFORE
attempting installation.
Connect Uno DC output cable
to Focus light DC power cable
Connect strain relief carabiner
on light cable to the Uno Panel
Pictured: Connections at front of Uno Panel (left) and strain relief carabiner as seen from back of panel (right)
Installing your Focus Sea Cage light - Instructions:
»
Step 1: Ensure Mains power is OFF.
»
Step 2: Ensure Focus light is suspended as required and fully submerged in open water.
»
Step 3: Connect the Focus light connector to the DC output connector.
»
Step 4: Connect the strain relief carabiner on the light cable to the Uno Panel.
»
Step 5: Ensure all connections are secure and that Ingress Protection Caps are secure on unused outlets.
View this manual live
on our website.
Sea Cage Lighting System Manual
ver.13082021-00
Page 29
Please note the information in this document
is subject to change without notice.