Planar M40L, Installation Manual

Page: 57 / 112

Zoom and Viewport
m40L/m46L Installation Guide 47
Zoom and Viewport
Zoom fits the edges of a large picture - one that covers many displays’ screens - from
side to side and top to bottom.
Note: Zoom and Viewport adjustments are mainly used for Planar’s cube products with no
mullions. Users with direct-view LCD monitors may want to skip this section.
To access the Zoom menus, press
SIZE
/
POS
twice on the remote to open the
ZOOM
TOP
&
LEFT
menu. Press
SIZE
/
POS
a third time to open the
ZOOM BOTTOM
&
RIGHT
menu.
You can zoom the sides up to +100 pixels larger in each direction. You can also zoom
the sides up to –100 pixels smaller , but only if that side is not the edge of the overall
picture. An example may help make this point more clearly.
The picture is cropped and there is some extra picture to the right, off the screens. All
the displays can be zoomed out (+) to make the picture larger in each direction.
Unit X cannot be zoomed in (–) at the bottom or the left side, because there is no
more picture to pull onto the screen.
Unit Y cannot be zoomed in at the bottom, but it can be zoomed in from the right (–)
because there is more picture out there. Of course, the center display - Column 2,
Row 2 - can be zoomed in any direction.
This is the original picture from the source.
Unit Y
Unit X