32
7
Storage
Store your analyzer under the following conditions: environment temperature from -20 to +40
0
С,
relative humidity up to 90 % (at 30
0
С).
8
Transportation
The analyzers must be shipped in any closed vehicles at temperature from -20 to +40° C, relative
humidity of 90% (at 30° C) and atmospheric pressure of 84 to 106.7 kPa (630 to 800 mm Hg).
Cargo holds, railway cars, containers, and truck beds, used for transportation should be free from
any traces of cement, coal, chemicals, etc. When shipped by air, the analyzers should be kept in
aircraft sealed compartments.
9
Labeling
The labeling of the analyzer is made in accordance with the standards. The serial number, which
contains the sequential number and the date-of-manufacture code, is stamped on the back panel
of the analyzer and can be viewed on the display in the identification data readout program
(Section 4.7).
10
Warranty Information
The manufacturer warrants that the IT-19C QAM Signal Analyzer conforms to the specifications of
this Manual when used in accordance with the operating regulations detailed in this Manual. The
manufacturer or regional representative shall, at his discretion, repair or replace, for free, any
Meter, recognized as faulty within the warranty period, which is twenty-four (24) months from the
date of purchase. Should the user fail to submit a document confirming the date of purchase, the
warranty period will be determined by the date of manufacture.
The warranty is invalid if:
a) a defect or damage is caused by improper storage, misuse, careless handling, improper
maintenance or accident;
b) the product was modified or repaired by an unauthorized person;
c) the product seals are tampered;
d) the product has mechanical damage.
The warranty does not cover built-in batteries.
Transport risks and costs associated with delivery from the manufacturer or authorized service
centers are borne by the buyer.
The manufacturer is not responsible for direct or indirect damage of any kind to people or goods
caused by the use of the product and/or suspension of use as a result of possible repair.
When returning a defective product, please provide exact details of this product and a clear
description of the failure. The manufacturer (regional representative) reserves the right to check
the product in their laboratories to verify the validity of the claim.
