Clean Pole Installation and User’s Guide (OM720-02) 13
OPERATING INSTRUCTIONS
The Clean Pole Power System is intended to provide power to the Clean Screen Computer
Workstation in a mobile environment.
The battery in the Clean Pole Power System will power the Clean Screen up to 12 hours
before needing a recharge. Maximize battery life by recharging the battery when the low
charge alarm activates.
CAUTION
Failure to recharge when the alarm activates may result in battery damage.
Plug in the Clean Pole Power System within 30 minutes to avoid losing
power to the Clean Screen and losing information.
Plug in the Clean Pole Power System when working near a wall outlet or during idle times to
keep the battery charged and ready for use. When using your Clean Pole Power System near a
wall outlet you should always keep it plugged in to keep the battery charged and ready for
mobile use.
CAUTION
ATTENTION: Plug the Clean Pole Power System in immediately when
alarm sounds or light flashes. Failure to do so may result in permanent
damage to the battery.
Battery Life
If the Clean Pole Power System is not recharged within 24 hours of the low charge indicator
light flashing or the alarm sounding, the battery may become damaged, significantly reducing
battery life.
For the longest battery life, plug the Clean Pole Power System into a wall outlet as soon as the
low charge alarm sounds or light flashes. Whenever not in use, plug into a wall outlet to keep
the battery fully charged.
