16 Clean Pole Installation and User’s Guide (OM720-02)
Internal Fan Cleaning
Periodic cleaning of the internal fan is required. Perform servicing during each battery
replacement.
Tools Required
To clean the internal fan you will need a Phillips head screwdriver, a small vacuum cleaner,
and a soft-bristle brush.
CAUTION
Make sure the Clean pole is disconnected from the power before proceeding.
1.
Disconnect the AC power cord from the Clean Pole.
2.
Remove the 4 Phillips pan head screws from the top of the battery/charger casing.
3.
Remove the top. Be careful not to damage or disconnect the wires connected to the
LED/Siren switch.
4.
Using a vacuum and a soft brush, remove the dust and lint from the fan located
between the battery and charger.
5.
Remove the dust or lint buildup around the external casing vent.
6.
Reassemble the top of the battery/charger case.
CAUTION
Be careful not to pinch the three wires from the LED/Siren switch between
the case top and the mounting brackets.
7.
Reinstall the four Phillips pan head screws into the top of the battery/charger case.
8.
Charge the battery if necessary.
The Clean Pole is now ready for use.
